
Add to Cart
EX203 low speed handpiece kit
Contra angle handpiece
1.Low Speed 22,000-27,000 rpm.
2.The shank of the instrument mounted therein is 2.35 mm
3.Fastening of the instruments with a turning latch·
4.Autoclavable 135°C·
5.For any lab or E-type motors·
Straight handpiece
1.Working pressure: 0.3MPa (4-hole);
2.0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
3.Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
4.Noise: less than 68dB
5.Air consumption: about 56L/min
6.Ratio: 1:1
7.Max speed of contra angle: 25000rpm/min.
Air Mortor EX-203
1.Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
2.1:1 Direct Drive
3.Midest 4 hole or borden 2 hole
4.Max speed 20,000 min-1